Overview
All new for 2023, this X-Rider range is a the perfect family/fishing boat cross over. The new 520 model is based off of our ever popular Commander Series, while the 561, 591 and 631 are all modelled of off our Canyon Console offshore plate series.
This aim of this series was to create a hull which can be a multi-use boat, allowing for comfortable days on the water with family and friends, whilst doubling as a serious off-shore fishing boat.
Series
X-Rider
Code
MCB-561XR
Max HP
150
Length
18.53ft
/ 5.65m
Depth
1.5m
Beam/Width
2.45m
Weight
800kg
- EngineMax HP 150
- Dimensions & WeightsLength 18.53ft / 5.65mDepth 1.5mBeam/Width 2.45mBottom 4mSides 43mWeight 800kg
Standard Features
- 4mm 5083 high tensile Keel Sheets
- 4mm 5052 Side Sheets
- 4mm Bulkheads and frames fully welded to hull – not floating
- Soft Rider transom with twin boarding platforms
- Fully welded gunnels and side decks
- Extruded Side Decks
- Transom with soft rider transom
- Large aluminium anchor well
- 32mm Bow & Rear Rails
- Heavy-duty bow sprit with double rollers and rope keepers
- Full carpeted floor
- Cast alloy bollards x 3
- Transducer brackets x 2
- Australian Standards Approved underfloor foam floatation
- Duel consoles with Aero screen
- Alloy rivited rod holders x 4
- Transom door
- Live bait tank in transom - plumbed
- Bait board/ski pole - removable
- Rear lounge & back rest
- Bow cushions - removable
- Padded bow back rest
- Large side pockets
- Heavy-duty dive boarding ladder
- Hydraulic steering system
- Sports spoke steering wheel
- Drivers & passenger pedestal seats
- 175L underfloor fuel tank with sender
- Marine level tinned wiring loom
- 5 gang switch panel with 12V outlet
- LED nav lights & anchor light
- Bilge pump
- X-Rider grey paint, inside & out
- Graphics
- Outer edge hull - reverse chine
Optional Features
- Black Ops Pack - upgrade to welded in rod holders, graphite grey paint (internal & external), matt black stripes & 3 x Black Ops decals
- Checker plate/alloy welded self-draining floor
- Alloy rod holders - welded in
- 5mm 5083 high tensile bottom sheets and transom
External Paint
Internal Paint
- DetailsSeries X-RiderCode MCB-561XRMax HP 150Length 18.53ft / 5.65mDepth 1.5mBeam/Width 2.45mWeight 800kg
- Specifications
- EngineMax HP 150
- Dimensions & WeightsLength 18.53ft / 5.65mDepth 1.5mBeam/Width 2.45mBottom 4mSides 43mWeight 800kg
- Engine
- Features
Standard Features
- 4mm 5083 high tensile Keel Sheets
- 4mm 5052 Side Sheets
- 4mm Bulkheads and frames fully welded to hull – not floating
- Soft Rider transom with twin boarding platforms
- Fully welded gunnels and side decks
- Extruded Side Decks
- Transom with soft rider transom
- Large aluminium anchor well
- 32mm Bow & Rear Rails
- Heavy-duty bow sprit with double rollers and rope keepers
- Full carpeted floor
- Cast alloy bollards x 3
- Transducer brackets x 2
- Australian Standards Approved underfloor foam floatation
- Duel consoles with Aero screen
- Alloy rivited rod holders x 4
- Transom door
- Live bait tank in transom - plumbed
- Bait board/ski pole - removable
- Rear lounge & back rest
- Bow cushions - removable
- Padded bow back rest
- Large side pockets
- Heavy-duty dive boarding ladder
- Hydraulic steering system
- Sports spoke steering wheel
- Drivers & passenger pedestal seats
- 175L underfloor fuel tank with sender
- Marine level tinned wiring loom
- 5 gang switch panel with 12V outlet
- LED nav lights & anchor light
- Bilge pump
- X-Rider grey paint, inside & out
- Graphics
- Outer edge hull - reverse chine
Optional Features
- Black Ops Pack - upgrade to welded in rod holders, graphite grey paint (internal & external), matt black stripes & 3 x Black Ops decals
- Checker plate/alloy welded self-draining floor
- Alloy rod holders - welded in
- 5mm 5083 high tensile bottom sheets and transom
- Colours
External Paint
Internal Paint