631 Canyon Runner
$49,087.00
Max HP
200
Length
20.83ft
/ 6.35m
Depth
1.55m
Beam/Width
2.5m
Weight
1,100kg
Seating Capacity
7
Overview
Series
Canyon Runner
Code
MCB-631CR
Max HP
200
Length
20.83ft
/ 6.35m
Depth
1.55m
Beam/Width
2.5m
Weight
1,100kg
Seating Capacity
7
Shaft
X-Long
- EngineMax HP 200
- HullSeating Capacity 7Shaft X-Long
- Dimensions & WeightsLength 20.83ft / 6.35mDepth 1.55mBeam/Width 2.5mBottom 4mSides 4mWeight 1,100kg
Standard Features
- 4mm 5083 high tensile Keel Sheets
- 4mm 5052 Side Sheets
- 4mm Bulkheads and frames fully welded to hull – not floating
- Soft Rider transom with twin boarding platform
- Fully welded gunnels and side decks
- Extruded Side Decks
- Enclosed rear transom with twin hatches
- Large aluminium anchor well
- 32mm Bow & Rear Rails
- Heavy-duty bow sprit with double rollers and rope keepers
- Full carpeted floor
- Cast alloy bollards x 3
- Transducer brackets x 2
- Australian Standards Approved underfloor foam floatation
- Low profile Cuddy Cabin with front opening hatch and walkaround side deck access
- Alloy rivited in rod holders x 4
- 2 x drink holders in dash
- Glove box in dash
- Drivers and passenger seat boxes with seat slides and swivels and folding seats
- Large side pockets
- Heavy-duty dive boarding ladder
- Heavy-duty dive boarding ladder
- Hydraulic steering system
- Sports steering wheel
- Folding rear lounge & back rest
- 175L underfloor fuel tank with sender (561)
- 200L underfloor fuel tank with sender (591)
- 250L underfloor fuel tank with sender (631)
- Marine level tinned wiring loom
- 5 gang switch panel with 12V outlet
- LED nav lights & anchor light
- Bilge pump
- White paint
- Graphics
- Outer edge hull - reverse chine
Optional Features
- Transom door
- Two-tone paint
- Bait board with bait tank
- Plumbing of bait tank
- Kill tank
- Checker plate self-draining floor
- Alloy rod holders, upgraded to welded
- 5mm bottom sheet upgrade
- Cabin bunk cushions - removable
External Paint
Internal Paint
- DetailsSeries Canyon RunnerCode MCB-631CRMax HP 200Length 20.83ft / 6.35mDepth 1.55mBeam/Width 2.5mWeight 1,100kgSeating Capacity 7Shaft X-Long
- Specifications
- EngineMax HP 200
- HullSeating Capacity 7Shaft X-Long
- Dimensions & WeightsLength 20.83ft / 6.35mDepth 1.55mBeam/Width 2.5mBottom 4mSides 4mWeight 1,100kg
- Engine
- Features
Standard Features
- 4mm 5083 high tensile Keel Sheets
- 4mm 5052 Side Sheets
- 4mm Bulkheads and frames fully welded to hull – not floating
- Soft Rider transom with twin boarding platform
- Fully welded gunnels and side decks
- Extruded Side Decks
- Enclosed rear transom with twin hatches
- Large aluminium anchor well
- 32mm Bow & Rear Rails
- Heavy-duty bow sprit with double rollers and rope keepers
- Full carpeted floor
- Cast alloy bollards x 3
- Transducer brackets x 2
- Australian Standards Approved underfloor foam floatation
- Low profile Cuddy Cabin with front opening hatch and walkaround side deck access
- Alloy rivited in rod holders x 4
- 2 x drink holders in dash
- Glove box in dash
- Drivers and passenger seat boxes with seat slides and swivels and folding seats
- Large side pockets
- Heavy-duty dive boarding ladder
- Heavy-duty dive boarding ladder
- Hydraulic steering system
- Sports steering wheel
- Folding rear lounge & back rest
- 175L underfloor fuel tank with sender (561)
- 200L underfloor fuel tank with sender (591)
- 250L underfloor fuel tank with sender (631)
- Marine level tinned wiring loom
- 5 gang switch panel with 12V outlet
- LED nav lights & anchor light
- Bilge pump
- White paint
- Graphics
- Outer edge hull - reverse chine
Optional Features
- Transom door
- Two-tone paint
- Bait board with bait tank
- Plumbing of bait tank
- Kill tank
- Checker plate self-draining floor
- Alloy rod holders, upgraded to welded
- 5mm bottom sheet upgrade
- Cabin bunk cushions - removable
- Colours
External Paint
Internal Paint